Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
-
Re: TX & RX on a single site
Providing you have an existing TX antenna, or can make a temporary one, transmit low to 100W on or near your target frequency. Also find a local AM broadcast station with a very strong signal near th…1 -
Re: Flex 6400M current draw vs my other rig.
You are making apples and oranges comparison. The flex uses a high current bias to place your signal in the linear portion of the amplifier operation. Your numbers are higher than in my 6700 case - 1…1 -
Re: Automated diversity reception for noise cancellation/beamsteering/ESC
Bill, totally agree. My 6700 purchase, pre V1 ssdr, was entirely because of the 5000 noise processing and promise to have (**eventual**) support in 6000. Other features are unique between models and …2 -
Re: AM/FM broadcast interference on 80M
May be a different case. Listening to the received signal, are there TWO stations heard? I have been chasing the source of the mixing of two broadcast band stations (by a diode/rust) somewhere in the…1 -
Re: Ethernet cable
Needs to use normal attaching a connector. Crimp tool is the normal way. Another thread had a paper on audio grounding which found that double shielding is better PROVIDING a parallel ground is inclu…1
